MUST-HAVES
FLOW DOWN® magnetic number plate holders suitable for Kia - frameless
You drive a Kia and want the clean look, without visible screws or advertising print on the plate? At FLOW DOWN® you will find vehicle-specific magnetic plate holders suitable for Kia, developed for the GT models of the Korean performance line: Stinger GT, Ceed GT, ProCeed GT. Made in Germany, produced in our own workshop in Essen from UV-resistant ASA.
Korean tuning at Kia - where we specialise
Just as with Hyundai N, the Kia GT line is a clear focus at FLOW DOWN®. The Stinger GT as a performance saloon, the Ceed GT as a hot hatch and the ProCeed GT as a shooting brake are among the most-tuned Kias in the German-speaking scene. We supply the range to match - vehicle-specific magnetic plate holders, tailpipes and valve controllers.
Available Kia models
We currently stock vehicle-specific holders for the following Kia models. Each one is developed for that model's bumper geometry:
Sports saloon & shooting brake
Hot hatch & crossover
Driving a Kia that is not listed above? We keep extending the Kia range. For other Kia models (Optima, Sportage, EV6 and so on) our universal holder is the flexible answer - and via WhatsApp you can ask whether a vehicle-specific holder is planned for yours.
The Kia GT family - three body styles, three holders
The Kia GT models share the GT design language with its tiger nose grille, but their front bumper geometries differ:
Kia Stinger GT
The performance saloon with its long bonnet and sporty four-door layout. Its own bumper geometry with a wide plate recess - our Stinger holder is developed for exactly that.
Kia ProCeed GT
The shooting brake with a sports car silhouette. Our ProCeed holder fits the facelift from 2022 - the latest generation with its revised front end.
Kia Ceed GT & GT-Line
The compact hot hatch. Our Ceed holder fits not only the Ceed GT but also the Ceed GT-Line and the XCeed GT - the plate position is the same on all three.
How are the FLOW DOWN® holders fitted to a Kia?
On a Kia the magnets are bolted with M4 screws straight into the bumper or the tailgate, where the OEM holder sits. At the front that means the bumper, at the rear the tailgate (on the ProCeed Shooting Brake or Ceed hatchback, for example). The ASA layer behind the magnet prevents direct contact with the paint.
The ASA backing plates are bonded to the back of the plate with 3M VHB tape. On the Stinger GT the plate sits in a dedicated recess in the sports bumper - our holder is matched precisely to that geometry.
Kia with driver assistance systems - does it work?
Yes, without restriction. The FLOW DOWN® holders are designed so that neither the parking sensors nor the Kia Drive Wise systems are affected:
- Parking sensors: they sit to the sides of the bumper, well clear of the plate area - on the Stinger GT, Ceed GT or ProCeed GT alike. No effect whatsoever.
- Front camera (lane keep assist, forward collision avoidance): up by the rear-view mirror - the holder does not touch it.
- Radar sensor (smart cruise control on the Stinger GT): usually behind the tiger nose grille rather than directly behind the plate - the holder sits above or beside it.
What to know before buying a Kia holder
- Front, rear or set: choose in the variant picker. For the full look we recommend the complete set.
- Ceed GT, Ceed GT-Line or XCeed GT: our Ceed holder fits all three - the plate position is the same.
- Pre-facelift ProCeed GT: our ProCeed holder is developed for the facelift from 2022. For the pre-facelift ProCeed (up to 2021) please ask via WhatsApp first.
- Stinger GT facelift: the Stinger GT was revised slightly in 2021, but the front bumper kept its main proportions - our holder fits both versions.
- Plate size: on every Kia both 520 x 110 mm (standard) and 460 x 110 mm (short) fit. Special sport plates on request.
- 3D plates: no problem. The raised areas left by the embossed characters on the back are securely enclosed by our thick 3M tape. We recommend warming the plate briefly with a hair dryer after sticking it on, so the adhesive flows around the rivets and bonds fully.
More tuning parts for your Kia GT
Want to finish your Kia build properly? As a specialist in Korean tuning, FLOW DOWN® offers the right range for the whole Kia GT family:
Ceed & ProCeed
Stinger & valve control
Carbon parts, tailpipes, valve controllers, body kits, wheels and more - sorted specifically for the Kia GT models.
Advice & fitting at our workshop
Not sure which holder suits your Kia - because you are unsure which ProCeed generation you have, or whether yours is a facelift? At our workshop in Essen we advise you in person and can adapt the holder on the car. Book by phone on 0176 76043407 or via WhatsApp.
Frequently asked questions about Kia magnetic plate holders
Does the Ceed GT holder also fit the XCeed GT or Ceed GT-Line?
Yes. Our Ceed holder is made for the Kia Ceed GT, Ceed GT-Line and XCeed GT - the plate position is identical on all three. One holder covers the whole Ceed GT family.
Which ProCeed generation is the holder for?
Our ProCeed holder is developed for the ProCeed GT facelift from model year 2022. If you have a pre-facelift ProCeed (up to 2021), drop us a message via WhatsApp - we will check the fit or help with a custom solution.
Do the holders also work with 3D number plates?
Yes. On 3D plates the embossed characters create slight raised areas on the back. Our thick 3M tape encloses them securely and still bonds across the full surface. We recommend warming the plate briefly with a hair dryer after sticking it on - the adhesive then flows around the rivets and reaches full strength.
Does the Stinger GT holder also fit a Stinger diesel or 2.0T?
Yes. The engine makes no difference to the fit - what matters is the bumper geometry, and that is identical across all Stinger GT versions (3.3 T-GDI, 2.0 T-GDI, 2.2 CRDi). Our holder fits the whole Stinger GT range.
Does the holder interfere with the Kia Drive Wise assistance systems?
No. The parking sensors sit to the sides of the bumper, well clear of the plate area. The front camera (for lane keep assist and forward collision avoidance) is up by the rear-view mirror and is not touched. The radar for smart cruise control on the Stinger GT sits behind the tiger nose grille, not directly behind the plate.
Where are the magnets fixed on a Kia?
The magnets are bolted with M4 screws directly to the bumper at the front and the tailgate at the rear, at the position of the OEM plate holder. On the ProCeed Shooting Brake and the Ceed hatchback the rear plate sits in the tailgate, so that is where they go. On the Stinger GT the plate sits in the wide recess of the sports bumper. Behind each magnet an ASA layer prevents direct contact with the paint.
Does the Ceed GT holder also fit a standard Ceed?
No. The standard Ceed has a different bumper without the typical GT/GT-Line recess. For standard Ceed models our universal holder is the right choice.
My Kia model is not in the range - what now?
We keep extending the Kia range. If your model is not listed (Optima, Sportage, EV6, K5 and so on), our universal holder is a flexible alternative - or you drop us a message to ask whether a vehicle-specific holder is planned.
Do I need the same holder front and rear?
Yes - on the same Kia the plate positions front and rear match geometrically. Simply choose "front", "rear" or "complete set" in the variant picker. For a consistent look front and rear we recommend the set.
Can I fit the holder to my Kia myself?
Yes. The first fitting takes about 10 minutes and is straightforward with the enclosed instructions. All you need is isopropanol to degrease and a hair dryer to warm the tape. If you would rather leave it to us: at our workshop in Essen we fit it properly.
All brands and model designations named in this shop, such as Kia, Stinger GT, Ceed GT, GT-Line, XCeed GT and ProCeed GT, are used solely to describe the compatibility of our products. FLOW DOWN® is an independent supplier of tuning parts and accessories and is not connected with Kia Corporation. Legal responsibility for mounting the plate correctly rests with the vehicle keeper.