Maxton Design
Carbon Heckdiffusor V.2 for einzelne Endrohre suitable for BMW 1er F40 and M135i
With Teilegutachten (parts certificate)
Quantity:
Sicherer Versand
sorgfältig verpackt
Trustpilot
4,8
437 reviews
Carbon rear diffuser V.2 for BMW 1 Series F40 M-Package/ M135i
Suitable vehicles :
BMW 1 Series F40 with M-Package from 2019
BMW M135i F40 from 2019
-
Carbon fiber materials are characterized by high durability and low weight. Carbon is very often used in motorsports, especially in vehicle aerodynamics. Various types of spoilers, diffusers, splitters and flaps are often made from carbon.
In our Carbon Division - a production department that specializes in the processing of carbon - the elements we offer are manufactured, including the rear diffuser for the BMW 1 Series F40 M-Package/ M135i. The rear diffuser is an aerodynamic component for the front section that covers the lower part of the rear bumper.
The rear diffuser lowers the body both visually and physically. This reduces the air space under the car by 2 centimeters. The diffuser is equipped with mounting holes. These holes allow you to avoid interfering with the structure of the element, which does not reduce its strength.
The rear diffuser was made in Poland. It was produced using thermal printing treatment. The carbon fiber is cured at high temperature and high pressure. An autoclave is used for this. This is the most modern method of carbon production, which guarantees an excellent effect - both in terms of strength and optical properties.
We ship carbon products properly secured - in addition to the normal film that protects the component from scratches, we also use a large amount of bubble wrap and a protective mat that protect the product from shocks and vibrations during transport.
All brands, model designations and manufacturers named in this shop, such as AUDI, BMW, Hyundai, Kia, Toyota, VW, Tesla, serve solely to describe the compatibility of our products. They have no connection with the respective brand owners, and unless expressly stated otherwise these are not original parts from those manufacturers.
FLOW DOWN® is an independent supplier of tuning and accessory parts. The brand names are used purely for orientation and imply no cooperation, licensing or approval by the respective rights holders. All trademark and naming rights remain with their respective owners.
Contact Person DE Maxtondesign Deutschland GmbH Friesenweg 4-6 49324 Melle, Germany info@maxtondesign.de |
Manufacturer: Maxton Design |
FAQ
Count your tailpipes. One pipe per side means V.2, two pipes per side mean V.1. The design is the same on both; it is only about the cut-outs.
That depends on pipe diameter and position. Send us a photo of the rear and we will compare it with the cut-outs before you order.
Replaced. The carbon part takes its place; it is not fitted over the top.
Then it rubs there permanently, and on carbon that goes straight into the clear coat. We check the position before final tightening and realign the exhaust if needed.