{"title":"NUMBER PLATE HOLDERS","description":"\u003cp\u003eMagnetic number plate holders by FLOW DOWN® – made in Germany. Vehicle-specific and universal holders suitable for BMW, Audi, Hyundai, Kia, Ford, Toyota and VW. Frameless, driven at over 300 km\/h in real-world testing, produced in our own workshop in Essen.\u003c\/p\u003e","products":[{"product_id":"magnet-kennzeichen-halter-fur-hyundai-i30n-facelift","title":"Magnetic number plate holder suitable for Hyundai i30 N Facelift","description":"\u003ch1\u003eMagnetic license plate holder suitable for Hyundai i30 N Facelift\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder designed for the Hyundai i30 N Facelift makes the front area visibly cleaner and allows the license plate to be removed at any time. No more screw mounts – once installed, the license plate can be removed in seconds for track days, photoshoots, or car meets.\u003c\/p\u003e\n\u003cp\u003eCurrently the only magnetic holders on the market specifically developed for the i30 N Facelift. The magnets are precisely matched to the shape of the i30 N Facelift's grille and are the same color as the original grill – when removed, the holders are almost invisible.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe only magnetic holder specifically for the i30 N Facelift on the market\u003c\/li\u003e\n\u003cli\u003ePerfectly fitting the kidney grille – almost invisible when removed\u003c\/li\u003e\n\u003cli\u003eHolder color matching the original grill\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Shape and color are precisely matched to the kidney grille of the i30 N Facelift. Weather-resistant and temperature-stable.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eAt the front, the magnets are precisely screwed directly into the factory mounting points in the grill of the i30 N Facelift. At the rear, the original screw points do not fit the holder – here, the supplied screws must be used, which are additionally screwed into the plastic beneath the holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: All supplied screws must be used during assembly to ensure full holding power.\u003c\/strong\u003e Then, the magnetic plates are glued to the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional assembly is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai i30 N (PDe) Facelift – from model year 2020\u003c\/li\u003e\n\u003cli\u003eHyundai i30 N Performance Facelift\u003c\/li\u003e\n\u003cli\u003eHyundai i30 Fastback N Facelift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These holders fit \u003cstrong\u003eexclusively the Facelift\u003c\/strong\u003e. For the Hyundai i30 N Pre-Facelift (PD, model years 2017–2020), there is a separate, model-specific \u003ca href=\"https:\/\/fluwdown.com\/products\/magnet-kennzeichenhalter-passend-fur-hyundai-i30n-vfl\"\u003eFLOW DOWN® magnetic license plate holder suitable for Hyundai i30 N VFL\u003c\/a\u003e with adapted mounting.\u003c\/p\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (precisely fitting the i30 N Facelift grille)\u003c\/li\u003e\n\u003cli\u003eMagnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003eScrews (all supplied screws must be used during installation)\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":51315409191176,"sku":"FDE002","price":39.9,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":51315409223944,"sku":"FDE005-08","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_MAGNETKZH_I30NFL1.jpg?v=1740758409"},{"product_id":"magnet-kennzeichen-halter-universal","title":"Universal magnetic number plate holder","description":"\u003ch1\u003eUniversal magnetic license plate holder\u003c\/h1\u003e\n\u003ch2\u003edescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® Universal Magnetic License Plate Holder replaces the classic screw-on holder with a magnetic system. Once mounted, the license plate can be attached and removed in seconds – perfect for everyday use, track days, car meets, or photoshoots. Universally compatible with almost any vehicle brand, e.g., Audi, BMW, Mercedes, VW, Hyundai, Kia, Toyota, Tesla, and many more.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and subjected to practical testing on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUniversally compatible – for every vehicle brand\u003c\/li\u003e\n\u003cli\u003eMade in Germany – Magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife.\u003c\/li\u003e\n\u003cli\u003eLicense plates can be attached and removed in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for sheet metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weatherproof and also suitable for slightly curved bumpers.\u003c\/p\u003e\n\u003ch2\u003euse\u003c\/h2\u003e\n\u003cp\u003eScrew magnets to the bumper, stick magnetic plates to the license plate – done. Simply attach the license plate and remove it again when needed.\u003c\/p\u003e\n\u003cp\u003eOptionally, installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eSuitable vehicles\u003c\/h2\u003e\n\u003cp\u003eUniversally compatible with almost any vehicle – regardless of make and model. Also suitable for slightly curved bumpers.\u003c\/p\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, the Netherlands, Belgium, France, Italy, Spain, and Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003escope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic license plate plates (with pre-mounted 3M-Tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers for covering the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required, one for the front and one for the rear.\u003c\/p\u003e\n\u003ch2\u003eInformation on admission\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV (German Vehicle Registration Ordinance) when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549613842696,"sku":"FDE003","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549613875464,"sku":"FDE005","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_UNIVERSAL_MAGNET_KENNZEICHENHALTER_01_def07ac1-8aae-4ec4-9367-14231e7bff0d.jpg?v=1749411285"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-m3-f80-m4-f82-f83","title":"Magnetic number plate holder suitable for BMW M3 F80 \/ M4 F82 \/ F83","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW M3 F80 \/ M4 F82 \/ F83\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the BMW M3 F80 Sedan, M4 F82 Coupe, and M4 F83 Convertible replaces the original screw mount with a clean magnetic system. The distinctive M front with the kidney grille and large air intakes stands out much better without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for M3 F80, M4 F82 Coupe, and M4 F83 Convertible\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the M3 \/ M4 F series.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates to the license plate – done. Simply place the license plate on and remove it again as needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 F80 Sedan – Model years 2014–2018\u003c\/li\u003e\n\u003cli\u003eBMW M3 F80 Competition\u003c\/li\u003e\n\u003cli\u003eBMW M3 F80 CS\u003c\/li\u003e\n\u003cli\u003eBMW M4 F82 Coupe – Model years 2014–2020\u003c\/li\u003e\n\u003cli\u003eBMW M4 F82 Competition\u003c\/li\u003e\n\u003cli\u003eBMW M4 F82 CS\u003c\/li\u003e\n\u003cli\u003eBMW M4 GTS F82\u003c\/li\u003e\n\u003cli\u003eBMW M4 F83 Convertible – Model years 2014–2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549614006536,"sku":"FDE003-03","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549614039304,"sku":"FDE005-03","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_KZH_F8X1.jpg?v=1740568317"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83","title":"Magnetic number plate holder suitable for BMW M3 G80 \/ G81 \/ M4 G82 \/ G83","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW M3 G80 \/ G81 \/ M4 G82 \/ G83\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder suitable for the BMW M3 G80 Sedan, M3 Touring G81, M4 G82 Coupe, and M4 G83 Convertible replaces the original screw mount with a clean magnetic system. The distinctive M kidney grille and aggressive front design of the G80 \/ G82 models are much better showcased without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for M3 G80, M3 Touring G81, M4 G82, and M4 G83\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate can be attached and removed in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and matched to the bumper contour of the M3 \/ M4 G series.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates to the license plate – done. Simply place the license plate on and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 G80 Sedan – from model year 2020\u003c\/li\u003e\n\u003cli\u003eBMW M3 Competition G80\u003c\/li\u003e\n\u003cli\u003eBMW M3 CS G80\u003c\/li\u003e\n\u003cli\u003eBMW M3 Touring G81 – from model year 2022\u003c\/li\u003e\n\u003cli\u003eBMW M4 G82 Coupe – from model year 2020\u003c\/li\u003e\n\u003cli\u003eBMW M4 Competition G82\u003c\/li\u003e\n\u003cli\u003eBMW M4 CSL G82\u003c\/li\u003e\n\u003cli\u003eBMW M4 G83 Convertible – from model year 2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549614399752,"sku":"FDE004","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549614432520,"sku":"FDE005-04","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_BMW_M3_M4_G8X_MAGNET_KENNZEICHENHALTER_01.jpg?v=1727186349"},{"product_id":"magnet-kennzeichenhalter-passend-fur-audi-a3-s3-8v","title":"Magnetic number plate holder suitable for Audi A3 \/ S3 8V","description":"\u003ch1\u003eMagnetic license plate holder suitable for Audi A3 \/ S3 8V\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder suitable for the Audi A3 and S3 8V replaces the original screw mount with a clean magnetic system. The distinctive 8V front with the Singleframe grille stands out much better without a bulky holder – the license plate can be removed in seconds for photo shoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and put to the practical test on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Audi A3 and S3 8V (pre-facelift \u0026amp; facelift)\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the A3 \/ S3 8V.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A3 8V Pre-Facelift – Model years 2012–2016\u003c\/li\u003e\n\u003cli\u003eAudi A3 8V Facelift – Model years 2016–2020\u003c\/li\u003e\n\u003cli\u003eAudi S3 8V Pre-Facelift – Model years 2013–2016\u003c\/li\u003e\n\u003cli\u003eAudi S3 8V Facelift – Model years 2016–2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: For the Audi RS3 8V, there is a dedicated, model-specific FLOW DOWN® \u003ca href=\"https:\/\/fluwdown.com\/products\/magnet-kennzeichen-halter-audi-s3-rs3-8v\"\u003emagnetic license plate holder suitable for S3 \/ RS3 8V\u003c\/a\u003e, as the RS3 has a different bumper mounting.\u003c\/p\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549614727432,"sku":"FDE003-04","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549614760200,"sku":"FDE005-06","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_AUDIA3_MAGNET_KENNZEICHENHALTER_01.jpg?v=1727189045"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-m2-g87-inkl-lci-cs","title":"Magnetic number plate holder suitable for BMW M2 G87 (incl. LCI \u0026 CS)","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW M2 G87 (incl. LCI \u0026amp; CS)\u003c\/h1\u003e\n\u003ch2\u003edescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder is suitable for the BMW MThe G87 2 replaces the original screw-on license plate holder with a clean magnetic system. The G87's angular, wide front end with its enlarged air intakes is showcased much more effectively without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets. Fits all G87 versions, including the LCI and the top-of-the-line model. M2 CS.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and subjected to practical testing on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect fit for BMW M2 G87, M2 G87 LCI and M2 CS\u003c\/li\u003e\n\u003cli\u003eMade in Germany – Magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife.\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive felt pads for paint protection.\u003c\/li\u003e\n\u003cli\u003eDetailed assembly instructions specifically for the G87\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weatherproof and designed to fit the bumper contour. M2 G87 compatible. The included adhesive felts protect the bumper from friction caused by the license plate.\u003c\/p\u003e\n\u003ch2\u003euse\u003c\/h2\u003e\n\u003cp\u003eScrew magnets to the bumper, stick magnetic plates to the license plate – done. Simply attach the license plate and remove it again when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn a traditional car wash using cloths, it's advisable to briefly remove the license plate. At a self-service car wash with a pressure washer, the license plate can remain attached.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e For secure attachment to the M2 G87: Correct installation is crucial. Please be sure to... \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0565\/0667\/9478\/files\/M2_G87_Halter_Anleitung.pdf?v=1699306254\"\u003eAssembly instructions for the BMW M2 G87\u003c\/a\u003e Please note – only then can FLOW DOWN® guarantee its full holding power.\u003c\/p\u003e\n\u003cp\u003eOptionally, installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eSuitable vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 G87 – from model year 2023\u003c\/li\u003e\n\u003cli\u003eBMW M2 G87 LCI\u003c\/li\u003e\n\u003cli\u003eBMW M2 CS G87\u003c\/li\u003e\n\u003cli\u003eBMW M2 G87 mit M Performance Aero-Package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, the Netherlands, Belgium, France, Italy, Spain, and Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003escope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic license plate plates (with pre-mounted 3M-Tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003e2x adhesive felt pads as paint protection behind the license plate\u003c\/li\u003e\n\u003cli\u003eStickers for covering the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required, one for the front and one for the rear.\u003c\/p\u003e\n\u003ch2\u003eInformation on admission\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV (German Vehicle Registration Ordinance) when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549615153416,"sku":"FDE006","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549615186184,"sku":"FDE005-02","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_M2G87_MAGNET_KENNZEICHENHALTER_01.jpg?v=1727182546"},{"product_id":"magnet-kennzeichenhalter-passend-fur-audi-s3-rs3-8v","title":"Magnetic number plate holder suitable for Audi S3 \/ RS3 8V","description":"\u003ch1\u003eMagnetic license plate holder suitable for Audi S3 \/ RS3 8V\u003c\/h1\u003e\n\n\u003ch2\u003edescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder is suitable for the Audi SThe RS3 3 and RS3 8V replace the original screw-on license plate holder with a clean magnetic system. The striking 8V front end with its large air intakes and single-frame grille is showcased much better without the bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and subjected to practical testing on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePerfect fit for Audi S3 and RS3 8V\u003c\/li\u003e\n  \u003cli\u003eMade in Germany – Magnets and manufacturing\u003c\/li\u003e\n  \u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife.\u003c\/li\u003e\n  \u003cli\u003eLicense plates can be attached and removed in seconds\u003c\/li\u003e\n  \u003cli\u003eSuitable for sheet metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weatherproof and designed to fit the bumper contour. S3 \/ RS3 8V compatible.\u003c\/p\u003e\n\n\u003ch2\u003euse\u003c\/h2\u003e\n\u003cp\u003eScrew magnets to the bumper, stick magnetic plates to the license plate – done. Simply attach the license plate and remove it again when needed.\u003c\/p\u003e\n\u003cp\u003eOptionally, installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAudi S3 8V before facelift – Bj. 2013–2016\u003c\/li\u003e\n  \u003cli\u003eAudi S3 8V Facelift – Bj. 2016–2020\u003c\/li\u003e\n  \u003cli\u003eAudi RS3 8V Vor-Facelift – Bj. 2015–2017\u003c\/li\u003e\n  \u003cli\u003eAudi RS3 8V Facelift – Bj. 2017–2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, the Netherlands, Belgium, France, Italy, Spain, and Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\n\u003ch2\u003escope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n  \u003cli\u003e2x magnetic license plate plates (with pre-mounted 3M-Tape)\u003c\/li\u003e\n  \u003cli\u003e2x screws\u003c\/li\u003e\n  \u003cli\u003eStickers for covering the screw heads\u003c\/li\u003e\n  \u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required, one for the front and one for the rear.\u003c\/p\u003e\n\n\u003ch2\u003eInformation on admission\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV (German Vehicle Registration Ordinance) when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549615546632,"sku":"FDE028","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549615579400,"sku":"FDE005-05","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_AUDIRS3_S3_8V_MAGNET_KENNZEICHENHALTER_02_2d55f335-2734-4b81-8586-f0cb991f8249.jpg?v=1727701055"},{"product_id":"show-kennzeichen","title":"Show plate with FLOW DOWN® design","description":"\u003ch1\u003eShow license plate with FLOW DOWN® design – for hanging or magnetic use\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® show license plate is the perfect addition for anyone who wants to stand out at events, photo shoots, or tuning meets without displaying their original license plate. Instead of vehicle letters, the distinctive FLOW DOWN® design adorns the front or rear – clean, eye-catching, and crafted in a high-quality acrylic 3D style.\u003c\/p\u003e\n\u003cp\u003eThe show license plate is deliberately designed slightly larger than a standard license plate, so it completely covers the original plate – simply place it over, done, no visible edges.\u003c\/p\u003e\n\u003cp\u003eImportant: The show license plate is intended exclusively for events, photo sessions, and stationary display and is not approved for public road use.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFLOW DOWN® design in acrylic 3D style\u003c\/li\u003e\n\u003cli\u003eBuilt-in holders for direct hanging over the original plate\u003c\/li\u003e\n\u003cli\u003eOptionally also usable magnetically (in combination with replacement plates)\u003c\/li\u003e\n\u003cli\u003eCompletely covers the original license plate\u003c\/li\u003e\n\u003cli\u003eQuick change for events and photo shoots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-quality acrylic in 3D style. Weather-resistant, dimensionally stable, and designed for durability – even with multiple changes at events.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe show license plate can be attached in two ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOption 1 – Hanging (Standard):\u003c\/strong\u003e The built-in holders allow the show license plate to be hung directly over the original license plate. No magnets, no adhesive required – the fastest solution for events and meetups.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOption 2 – Magnetic:\u003c\/strong\u003e Those who have a \u003ca href=\"https:\/\/fluwdown.com\/products\/magnet-kennzeichen-halter-universal\"\u003eFLOW DOWN® magnetic license plate holder\u003c\/a\u003e installed on their vehicle can additionally attach the \u003ca href=\"https:\/\/fluwdown.com\/products\/flow-down-magnet-kennzeichenhalter-ersatzplatten\"\u003eFLOW DOWN® replacement plates\u003c\/a\u003e to the back of the show license plate. This allows the show license plate to be placed on the magnets just like a regular license plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eImportant note\u003c\/h2\u003e\n\u003cp\u003eThe show license plate is intended exclusively for events, photo shoots, tuning meets, or display presentations and \u003cstrong\u003eis not approved for use on public roads\u003c\/strong\u003e. The original license plate must be reattached before driving.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x show license plate with FLOW DOWN® design (acrylic 3D style)\u003c\/li\u003e\n\u003cli\u003eBuilt-in holders for hanging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Magnets and magnetic plates are \u003cstrong\u003enot included\u003c\/strong\u003e. Those who wish to use magnetic mounting additionally need the \u003ca href=\"https:\/\/fluwdown.com\/products\/flow-down-magnet-kennzeichenhalter-ersatzplatten\"\u003eFLOW DOWN® replacement plates\u003c\/a\u003e as well as a \u003ca href=\"https:\/\/fluwdown.com\/products\/magnet-kennzeichen-halter-universal\"\u003eFLOW DOWN® magnetic license plate holder\u003c\/a\u003e on the vehicle.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe show license plate is not approved for public road use and is intended exclusively for show, event, and display use.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Classic Grey","offer_id":50208280019208,"sku":"FDZ034","price":16.0,"currency_code":"EUR","in_stock":false},{"title":"Clean White","offer_id":50208279986440,"sku":"FDZ034-02","price":16.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/03_dd8ae81c-d6d7-4547-bab5-b712e16dd86b.png?v=1738869445"},{"product_id":"magnet-kennzeichenhalter-passend-fur-hyundai-kona-n","title":"Magnetic number plate holder suitable for Hyundai Kona N","description":"\u003ch1\u003eMagnetic license plate holder suitable for Hyundai Kona N\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Hyundai Kona N replaces the original screw mount with a clean magnetic system. The distinctive N front with its pronounced air intakes and characteristic honeycomb pattern stands out much better without a bulky holder – the license plate can be removed in seconds for track days, photo sessions, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and put to the practical test on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Hyundai Kona N\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and matched to the bumper contour of the Kona N.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai Kona N – from model year 2021\u003c\/li\u003e\n\u003cli\u003eHyundai Kona N Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-installed 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains brackets for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":50331649605896,"sku":"FDE062","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":50331649638664,"sku":"FDE005-07","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/Kennzeichenhalter_Hyundai_Kona_N.jpg?v=1742509627"},{"product_id":"flow-down-magnet-kennzeichenhalter-ersatzplatten","title":"Replacement plates for magnetic number plate holders","description":"\u003ch1\u003eMagnet License Plate Holder Replacement Plates\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® replacement plates are the two magnetic plates attached to the back of the license plate. They make any additional license plate compatible with the existing FLOW DOWN® magnet system – ideal for anyone who wants to get more out of their holder.\u003c\/p\u003e\n\u003cp\u003eTypical use cases: carrying a second license plate for alternating plates, preparing a show plate for events or meetings, expanding the system to the front \u003cem\u003eand\u003c\/em\u003e rear, or using the holders on a second vehicle. Equally suitable as a pure replacement if a plate gets damaged.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtends the existing magnet system to additional license plates\u003c\/li\u003e\n\u003cli\u003eIdeal for alternating or show license plates\u003c\/li\u003e\n\u003cli\u003eIdentical holding power as the original set\u003c\/li\u003e\n\u003cli\u003eCompatible with all FLOW DOWN® magnet license plate holders\u003c\/li\u003e\n\u003cli\u003ePre-assembled 3M-adhesive tape – ready to use immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance magnetic plates in a robust plastic housing with pre-installed 3M adhesive tape. Weather-resistant and temperature-stable.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003ePeel off the protective film from the 3M adhesive tape on the back of the plates, then align it with the bottom edge of the license plate and press firmly. Clean and degrease the adhesive surface thoroughly beforehand.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eApplication Examples\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwap plates: equip a second license plate with replacement plates for quick changes\u003c\/li\u003e\n\u003cli\u003eShow plates: prepare for events or photoshoots\u003c\/li\u003e\n\u003cli\u003eSystem expansion: a second set for front or rear\u003c\/li\u003e\n\u003cli\u003eSecond vehicle: same holder logic on another car\u003c\/li\u003e\n\u003cli\u003eReplacement: no need for a new complete set if one plate is damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe replacement plates fit all FLOW DOWN® magnetic license plate holders – universal as well as all vehicle-specific versions (Audi, BMW, VW, Hyundai, Kia, Toyota, Ford, and more).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eException Hyundai I30N Facelift:\u003c\/strong\u003e Three differently shaped plates per license plate are required there. Please select the special replacement plates variant for I30N Facelift in the variant selection. \u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M- adhesive tape)\u003c\/li\u003e\n\u003cli\u003e3x magnetic plates for the license plate (when selecting for I30N FL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set is designed for one license plate.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe replacement plates are part of the FLOW DOWN® magnetic license plate holder system. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the technical product data sheet for the magnetic license plate holder.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Universal","offer_id":50741886517512,"sku":"FDE003-02","price":14.9,"currency_code":"EUR","in_stock":true},{"title":"Hyundai I30N FL","offer_id":50741886550280,"sku":"FDE002-02","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_KZH_ERSATZPLATTEN_1.jpg?v=1749443997"},{"product_id":"magnet-kennzeichenhalter-passend-fur-ford-focus-st-fiesta-st","title":"Magnetic number plate holder suitable for Ford Focus ST \/ Fiesta ST","description":"\u003ch1\u003eMagnetic license plate holder suitable for Ford Focus ST \/ Fiesta ST\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Ford Focus ST and Ford Fiesta ST replaces the original screw mount with a clean magnetic system. The distinctive ST front with large air intakes is more visible without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Ford Focus ST and Fiesta ST\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the ST models.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus ST Mk4 – from 2019 onwards\u003c\/li\u003e\n\u003cli\u003eFord Focus ST Mk4 Facelift – from 2022 onwards\u003c\/li\u003e\n\u003cli\u003eFord Focus ST-Line\u003c\/li\u003e\n\u003cli\u003eFord Fiesta ST Mk8 – from 2017 onwards\u003c\/li\u003e\n\u003cli\u003eFord Fiesta ST Mk8 Facelift – from 2022 onwards\u003c\/li\u003e\n\u003cli\u003eFord Fiesta ST-Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x Screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":50892249137416,"sku":"FDE003-20","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_MAGNETKZH_FORD_1.jpg?v=1740674857"},{"product_id":"flow-down-klett-kennzeichenhalter","title":"Velcro number plate holder, frameless","description":"\u003ch1\u003eVelcro License Plate Holder Universal Frameless – No Drilling\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® Velcro License Plate Holder frameless is the clean alternative to the classic screw mount – without a visible frame, no drilling, no screws. The license plate sits directly on the bumper, held by an extremely strong Velcro system. Ideal for those who prefer a clean look without magnets.\u003c\/p\u003e\n\u003cp\u003eThe set includes Velcro fasteners for two license plates – one set for front and rear in one package. The adhesive strength is deliberately very high, ensuring the license plate stays securely in place even on the highway and at high speeds.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrameless, clean look\u003c\/li\u003e\n\u003cli\u003eComplete set for front and rear\u003c\/li\u003e\n\u003cli\u003eUniversal fit for any vehicle brand\u003c\/li\u003e\n\u003cli\u003eNo drilling, no screws\u003c\/li\u003e\n\u003cli\u003eHigh-strength Velcro system – suitable for highway use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-strength industrial hook-and-loop tape with self-adhesive backing. Weather-resistant, UV-stable, and temperature-resistant – designed for permanent use on the exterior bumper.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eTwo hook-and-loop fasteners are used per license plate: one is attached to the bumper, the second on the back of the license plate. Thoroughly clean and degrease the adhesive surfaces beforehand. Then place the license plate and press firmly.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eNote on removing the license plate\u003c\/h2\u003e\n\u003cp\u003eThe hook-and-loop fastener holds very firmly – removing the license plate is possible but not intended for regular use. For \u003cstrong\u003emetal license plates\u003c\/strong\u003e, we explicitly advise against peeling it off, as the metal may bend or permanently deform when detached. \u003cstrong\u003e3D license plates\u003c\/strong\u003e, due to their sturdy acrylic construction, are significantly more resistant and can be easily attached and removed.\u003c\/p\u003e\n\u003ch2\u003eSuitable Vehicles\u003c\/h2\u003e\n\u003cp\u003eUniversally compatible with almost any vehicle – regardless of make and model. Suitable for flat and slightly curved bumpers.\u003c\/p\u003e\n\u003ch2\u003eCompatible License Plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4x Velcro fasteners (for front and rear license plates, with self-adhesive backing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne set is sufficient for a complete vehicle – front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe Velcro license plate holder is registration-free and legally usable on public roads.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":52049183637768,"sku":"FDE063","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Klett-Kennzeichenhalter-3.jpg?v=1762160801"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-3er-4er-g20-g22-g23","title":"Magnetic number plate holder suitable for BMW 3 Series \/ 4 Series G20 \/ G22 \/ G23","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW 3 Series \/ 4 Series G20 \/ G22 \/ G23\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder suitable for the BMW 3 Series G20 as well as the 4 Series G22 Coupe and G23 Convertible replaces the original screw mount with a clean magnetic system. The distinctive BMW kidney grille and the M Sport design are showcased without bulky brackets – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eThe holder fits both the original BMW OEM grilles and common aftermarket grilles from other manufacturers, as the mounting for the license plate holder is generally identical.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for BMW 3 Series G20 as well as 4 Series G22 Coupe and G23 Convertible\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and aftermarket grilles\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the G20 \/ G22 \/ G23 models.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates to the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series G20 Sedan – from 2018 onwards\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series G21 Touring – from 2019 onwards\u003c\/li\u003e\n\u003cli\u003eBMW M340i G20 \/ G21\u003c\/li\u003e\n\u003cli\u003eBMW M3 G80\u003c\/li\u003e\n\u003cli\u003eBMW 4 Series G22 Coupe – from 2020 onwards\u003c\/li\u003e\n\u003cli\u003eBMW 4 Series G23 Convertible – from 2020 onwards\u003c\/li\u003e\n\u003cli\u003eBMW M440i G22 \/ G23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with BMW OEM grilles as well as common aftermarket grilles and comparable aftermarket variants.\u003c\/p\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":52391862075656,"sku":"FDE003-19","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":52391862108424,"sku":"FDE005-23","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-BMW-4er-G22-KZH-1.jpg?v=1757453943"},{"product_id":"magnet-kennzeichenhalter-passend-fur-kia-stinger-gt","title":"Magnetic number plate holder suitable for Kia Stinger GT","description":"\u003ch1\u003eMagnetic license plate holder suitable for Kia Stinger GT\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Kia Stinger GT replaces the original screw mount with a clean magnetic system. The expansive GT front with its large air intakes is better showcased without a bulky license plate holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Kia Stinger GT\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the Stinger GT.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKia Stinger GT Pre-Facelift – Model years 2017–2020\u003c\/li\u003e\n\u003cli\u003eKia Stinger GT Facelift – from model year 2020\u003c\/li\u003e\n\u003cli\u003eKia Stinger GT-Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval Notes\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":56982516793608,"sku":"FDE003-18","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":56982516826376,"sku":"FDE005-22","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-KIA-STINGER_Kennzeichenhalter-Magnet-1.jpg?v=1776183266"},{"product_id":"ersatz-magnete-fur-magnet-kennzeichenhalter","title":"Replacement magnets for magnetic number plate holders","description":"\u003ch1\u003eReplacement Magnets for Magnetic License Plate Holders\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe replacement magnets for the FLOW DOWN® magnetic license plate holder are the perfect solution if a magnet is damaged – for example, due to breakage from improper installation or an unfortunate incident in everyday life. A single defective magnet means no need for a new complete set, but a quick, affordable replacement.\u003c\/p\u003e\n\u003cp\u003eIdentical high-performance neodymium magnets as in the original set – tested up to 300 km\/h. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal replacement magnets for FLOW DOWN® magnetic license plate holders\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eIdentical holding power as the original\u003c\/li\u003e\n\u003cli\u003eCompatible with all FLOW DOWN® magnetic license plate holders\u003c\/li\u003e\n\u003cli\u003eFast, affordable replacement instead of a complete new set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and temperature-stable.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eRemove the defective magnet and screw the replacement magnet back in the same position. The existing magnetic plates on the license plate as well as the screw stickers remain intact.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe replacement magnets are compatible with all FLOW DOWN® magnetic license plate holders – universal as well as all vehicle-specific versions (Audi, BMW, VW, Hyundai, Kia, Toyota, and others).\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x replacement magnets for the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Screws, magnetic plates for the license plate, and screw stickers are not included – these are reused from the original set.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe replacement magnets are technically identical to the original. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the technical product datasheet for the magnetic license plate holder.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":57767078428936,"sku":null,"price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/Kennzeichenhalter-Magnete-FLOWDOWN.png?v=1777911040"},{"product_id":"magnethalter-set-in-weiss-sticker-upgrade-fur-magnet-kennzeichenhalter","title":"Magnet set in white – sticker upgrade for number plate holders","description":"\u003ch1\u003eMagnet Holder Set in White – Sticker Upgrade for Magnetic License Plate Holder\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Magnet Holder Set in White is the perfect upgrade for your FLOW DOWN® magnetic license plate holder if your vehicle has a white bumper. Instead of the standard black appearance, the visible areas of the holder are kept white, allowing the system to blend more subtly with the bodywork.\u003c\/p\u003e\n\u003cp\u003eThe set consists of white adhesive dots that are applied directly over the screw heads of the magnets, as well as a white plate that covers the area behind the magnet. The outer edge of the magnet remains black – this cannot be changed due to production reasons, but the overall impression is significantly lighter.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVisual upgrade for white bumpers\u003c\/li\u003e\n\u003cli\u003eCovers screw heads in white instead of black\u003c\/li\u003e\n\u003cli\u003eWhite 3D-printed plate behind the magnet\u003c\/li\u003e\n\u003cli\u003eQuick and tool-free application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eWeather-resistant stickers with opaque white color. The plate behind the magnet is 3D-printed from white, UV-stable plastic.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe set is ordered additionally to the FLOW DOWN® magnet license plate holder. During installation, the white adhesive dots are placed over the screw heads of the magnets, and the white plate is positioned behind the magnet. Afterwards, the visible area of the holder is white instead of black.\u003c\/p\u003e\n\u003ch2\u003eNote on Appearance\u003c\/h2\u003e\n\u003cp\u003eThe narrow outer edge of the magnet remains black – this production-related area cannot be covered. On a white bumper, the holder thus appears significantly more discreet overall, but is not 100% invisible.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x white adhesive dots for the screw heads\u003c\/li\u003e\n\u003cli\u003e2x white 3D-printed plates behind the magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set is designed for one license plate. Two sets are needed for front and rear.\u003c\/p\u003e\n\u003ch2\u003eUsage Notes\u003c\/h2\u003e\n\u003cp\u003eThe set is intended exclusively as an accessory for the FLOW DOWN® magnetic license plate holder and does not replace it. Registration requirements or vehicle safety are not affected by the sticker upgrade.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":57767186563336,"sku":"FDZ058","price":1.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-MAGNETE-SCHWARZ.png?v=1778157438"},{"product_id":"magnet-kennzeichenhalter-passend-fur-vw-golf-6-gti-r","title":"Magnetic number plate holder suitable for VW Golf 6 GTI \/ R","description":"\u003ch1\u003eMagnetic license plate holder suitable for VW Golf 6 GTI \/ R\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the VW Golf 6 GTI and Golf 6 R replaces the original screw mount with a clean magnetic system. The distinctive GTI and R front is showcased without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for VW Golf 6 GTI and Golf 6 R\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the Golf 6 GTI \/ R.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf 6 GTI – Model years 2009–2012\u003c\/li\u003e\n\u003cli\u003eVW Golf 6 GTI Edition 35\u003c\/li\u003e\n\u003cli\u003eVW Golf 6 R – Model years 2009–2013\u003c\/li\u003e\n\u003cli\u003eVW Golf 6 GTD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable License Plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains brackets for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is exempt from registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790320312584,"sku":"FDE003-17","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790320345352,"sku":"FDE005-21","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-vw-golf-6-gti_5fd94a1c-dc23-4c4f-8593-e1db7acc672b.jpg?v=1778247506"},{"product_id":"magnet-kennzeichenhalter-passend-fur-vw-golf-7-gti-r","title":"Magnetic number plate holder suitable for VW Golf 7 GTI \/ R","description":"\u003ch1\u003eMagnetic license plate holder suitable for VW Golf 7 (all models)\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the VW Golf 7 replaces the original screw mount with a clean magnetic system. The holder fits all Golf 7 variants – from the standard model to the GTI, R, and Clubsport. The license plate can be removed and reattached in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting all VW Golf 7 variants\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the Golf 7.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf 7 – Model years 2012–2020\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 Facelift – Model years 2017–2020\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 GTI\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 GTI Performance\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 GTI Clubsport\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 GTI Clubsport S\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 GTD\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 R\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 R Performance\u003c\/li\u003e\n\u003cli\u003eVW Golf 7 Variant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Additionally fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790366875912,"sku":"FDE003-16","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790366908680,"sku":"FDE005-20","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-vw-golf-7-gti.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-vw-golf-8-gti-r","title":"Magnetic number plate holder suitable for VW Golf 8 GTI \/ R","description":"\u003ch1\u003eMagnetic license plate holder suitable for VW Golf 8 GTI \/ R\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder suitable for the VW Golf 8 GTI and Golf 8 R visibly enhances the front. Instead of the screw mount, the license plate can be removed and reattached in seconds for photo shoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for VW Golf 8 GTI and Golf 8 R\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and matched to the bumper contour of the Golf 8 GTI \/ R.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates to the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf 8\u003c\/li\u003e\n\u003cli\u003eVW Golf 8 GTI – from model year 2020\u003c\/li\u003e\n\u003cli\u003eVW Golf 8 GTI Clubsport\u003c\/li\u003e\n\u003cli\u003eVW Golf 8 GTI Clubsport 45\u003c\/li\u003e\n\u003cli\u003eVW Golf 8 R – from model year 2020\u003c\/li\u003e\n\u003cli\u003eVW Golf 8 R Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is exempt from registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790376706312,"sku":"FDE003-15","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790376739080,"sku":"FDE005-19","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-VW-Golf-8-gti.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-m2-f87","title":"Magnetic number plate holder suitable for BMW M2 F87","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW M2 F87\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the BMW M2 F87 replaces the original screw mount with a clean magnetic system. The distinctive M2 front is showcased without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for BMW M2 F87\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the M2 F87.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 F87 – Model years 2016–2018\u003c\/li\u003e\n\u003cli\u003eBMW M2 Competition F87 – Model years 2018–2021\u003c\/li\u003e\n\u003cli\u003eBMW M2 CS F87 – Model years 2020–2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical Product Data Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval Notes\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed Technical Product Data Sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790379262216,"sku":"FDE003-14","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790379294984,"sku":"FDE005-18","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-bmw-m2-f87_5537d9b9-74f5-4376-88fd-0a956036471f.jpg?v=1778247624"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-4er-f32-f33","title":"Magnetic number plate holder suitable for BMW 4 Series F32 \/ F33","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW 4 Series F32 \/ F33\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder designed for the BMW 4 Series F32 Coupe and F33 Convertible gives the front a clean look without bulky screw mounts. The license plate can be removed and reattached in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for BMW 4 Series F32 Coupe and F33 Convertible\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate can be attached and removed in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the 4 Series F32 \/ F33.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 4 Series F32 Coupe – Yr. 2013–2020\u003c\/li\u003e\n\u003cli\u003eBMW 4 Series F33 Convertible – Yr. 2014–2020\u003c\/li\u003e\n\u003cli\u003eBMW 440i F32 \/ F33\u003c\/li\u003e\n\u003cli\u003eBMW M4 F82 \/ F83 (identical bumper mounting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the Following License Plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-installed 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is exempt from registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790380278024,"sku":"FDE003-13","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790380310792,"sku":"FDE005-17","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-bmw-4er-f32.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-1er-f40","title":"Magnetic number plate holder suitable for BMW 1 Series F40","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW 1 Series F40\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the BMW 1 Series F40 allows the license plate to be removed at any time and gives the front a clean look. Instead of the screw mount, the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for BMW 1 Series F40\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the 1 Series F40.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 1 Series F40 – from model year 2019\u003c\/li\u003e\n\u003cli\u003eBMW M135i xDrive F40\u003c\/li\u003e\n\u003cli\u003eBMW 128ti F40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Additionally fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790383161608,"sku":"FDE003-12","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790383194376,"sku":"FDE005-16","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-bmw-1er-f40.jpg?v=1778247475"},{"product_id":"magnet-kennzeichenhalter-passend-fur-kia-ceed-gt","title":"Magnetic number plate holder suitable for Kia Ceed GT","description":"\u003ch1\u003eMagnetic license plate holder suitable for Kia Ceed GT\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Kia Ceed GT replaces the original screw mount with a clean magnetic system. The GT front is showcased without a bulky screw holder, and the license plate can be removed in seconds for photoshoots, car meets, or track days.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Kia Ceed GT, GT-Line, and XCeed GT\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the Ceed.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eAt the front, the magnets are precisely screwed directly into the grill using the factory mounting points. At the back, the original screw points do not fit the holder – here, the supplied screws must be used, which are additionally screwed into the plastic beneath the holes.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKia Ceed GT Pre-Facelift – Model years 2018–2021\u003c\/li\u003e\n\u003cli\u003eKia Ceed GT Facelift – from model year 2022\u003c\/li\u003e\n\u003cli\u003eKia Ceed GT-Line\u003c\/li\u003e\n\u003cli\u003eKia XCeed GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Additionally fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-installed 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains brackets for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval Notes\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790383554824,"sku":"FDE003-11","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790383587592,"sku":"FDE005-15","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-kia-ceed-gt.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-kia-proceed-gt","title":"Magnetic number plate holder suitable for Kia ProCeed GT","description":"\u003ch1\u003eMagnetic license plate holder suitable for Kia ProCeed GT – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Kia ProCeed GT replaces the original screw mount with a clean magnetic system. The distinctive GT front is showcased without a bulky screw mount, and the license plate can be removed in seconds for photoshoots, car meets, or track days.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Kia ProCeed GT\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate can be attached and removed in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the ProCeed GT.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eAt the front, the magnets are precisely screwed directly into the grill over the factory mounts. At the back, the original screw points do not fit the holder – here, the supplied screws must be used, which are additionally screwed into the plastic beneath the holes.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKia ProCeed GT Pre-Facelift – Model years 2018–2021\u003c\/li\u003e\n\u003cli\u003eKia ProCeed GT Facelift – from model year 2022\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-installed 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790384701704,"sku":"FDE003-10","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790384734472,"sku":"FDE005-14","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-kia-proceed-gt.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-hyundai-i30n-vfl","title":"Magnetic number plate holder suitable for Hyundai i30N pre-facelift","description":"\u003ch1\u003eMagnetic license plate holder suitable for Hyundai i30 N VFL – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Hyundai i30 N pre-facelift makes the front area visibly cleaner and allows the license plate to be removed at any time. No more screw mounts – once installed, the license plate can be removed in seconds for track days, photoshoots, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Hyundai i30 N pre-facelift\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the i30 N VFL.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai i30 N (PD) Pre-Facelift – Model years 2017–2020\u003c\/li\u003e\n\u003cli\u003eHyundai i30 N Performance Pre-Facelift\u003c\/li\u003e\n\u003cli\u003eHyundai i30 Fastback N Pre-Facelift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical Product Data Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains brackets for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed Technical Product Data Sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790387454216,"sku":"FDE003-09","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790387486984,"sku":"FDE005-13","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-Hyundai-i30-n.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-hyundai-i20n","title":"Magnetic number plate holder suitable for Hyundai I20N","description":"\u003ch1\u003eMagnetic License Plate Holder Suitable for Hyundai i20 N – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Hyundai i20 N eliminates the need for screw mounting on the front. Once installed, the license plate can be attached and removed in seconds – ideal for track days, car meets, and photo sessions where a clean i20 N front appearance is desired.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitted for Hyundai i20 N\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the i20 N.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnetic plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai i20 N – from model year 2021\u003c\/li\u003e\n\u003cli\u003eHyundai i20 N Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790388502792,"sku":"FDE003-08","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790388535560,"sku":"FDE005-12","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-Hyundai-i20n.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-toyota-gr-yaris","title":"Magnetic number plate holder suitable for Toyota GR Yaris","description":"\u003ch1\u003eMagnetic license plate holder suitable for Toyota GR Yaris – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Toyota GR Yaris is the clean alternative to the original screw mount. Once installed, the license plate can be attached and removed in seconds – perfect for track days, rally stages, car meets, and photoshoots where the GR front should be showcased without obstruction.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Toyota GR Yaris\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the GR Yaris.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates to the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eToyota GR Yaris – from model year 2020\u003c\/li\u003e\n\u003cli\u003eToyota GR Yaris Circuit Pack\u003c\/li\u003e\n\u003cli\u003eToyota GR Yaris Track Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M-adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on Approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790390567176,"sku":"FDE003-07","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790390599944,"sku":"FDE005-11","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-toyota-yaris-gr.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-audi-s3-8y","title":"Magnetic number plate holder suitable for Audi S3 8Y","description":"\u003ch1\u003eMagnetic license plate holder suitable for Audi S3 8Y – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Audi S3 8Y visibly enhances the front and makes the license plate removable at any time. No more classic screw holders – once installed, the license plate can be removed and reattached in seconds for photoshoots, car meets, or track days.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Audi S3 8Y\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the S3 8Y.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates onto the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S3 8Y Sedan – from 2020 onwards\u003c\/li\u003e\n\u003cli\u003eAudi S3 8Y Sportback – from 2020 onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains mounts for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval Notes\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder does not require registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is stated in the enclosed technical product datasheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790395613448,"sku":"FDE003-06","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790395646216,"sku":"FDE005-10","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-audi-s3-8y.jpg?v=1778247476"},{"product_id":"magnet-kennzeichenhalter-passend-fur-audi-rs3-8y","title":"Magnetic number plate holder suitable for Audi RS3 8Y","description":"\u003ch1\u003eMagnetic license plate holder suitable for Audi RS3 8Y – FLOW DOWN®\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder for the Audi RS3 8Y is the clean alternative to the original screw mount. Once installed, the license plate can be attached and removed in seconds – ideal for photo shoots, track days, or a clean look at car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and practically tested on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for Audi RS3 8Y\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate attachable and detachable in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and tailored to the bumper contour of the RS3 8Y.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates to the license plate – done. Simply attach the license plate and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi RS3 8Y Sedan – from model year 2021\u003c\/li\u003e\n\u003cli\u003eAudi RS3 8Y Sportback – from model year 2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnet plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder requires no registration. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":57790396367112,"sku":"FDE003-05","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":57790396399880,"sku":"FDE005-09","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN-Magnet-Kennzeichenhalter-audi-rs3-8y.jpg?v=1778247475"}],"url":"https:\/\/fluwdown.com\/en\/collections\/license-plate-holder.oembed","provider":"FLOW DOWN®","version":"1.0","type":"link"}